HC12POD is the BDM12 - Interface for the HC12ICD -
Debugger .
Technical Data ( Firmware V5.16 ) :
HC12 / HCS12 targetconnector : 6 - PIN Motorola
standard - compatible BDM12 port ( ( with flash
programming voltage output Vfp (Pin 5) and EClock-input
(Pin 3) )
Additional : 2-wire flat band cable as BDM clock - input
from target
Standard BDM clock : 8 MHz
0.5 / 1 / 2 / 4 / 8 MHz BDM clock without external Eclock
from target or
2 / 4 / 8 / 24 (25 ) MHz BDM clock without external
Eclock from target
PLD - kits with any two BDM clocks between 2 MHz and
30 MHz available
Target's - EClock from 9,6kHz to 8MHz for the BDM
usable, if connected and enabled
Target supply voltage : 5V, 3.3VAdjustable programming voltage supply (ca. 11-12,5 V
DC) for HC12 Flash programming on board (optional)
DB9 connector to the PC - RS232
Alternatively 38400,57600,115200 Bps on the RS232 -
Interface , via USB-port with optional adaptor
RS232 interface cable included
Optionally power supply ( 5V DC ) via 6-pin BDM-cable
from target
or : via external power adaptor 9V - DC ( in this case it is
also possible to power the target ( 5V , 3.3V / ~
80-100mA )
mechanical dimensions : ~ 130 x 70 x 30 mm
|
|
View :
Click on the image to see a full-size version !
|
HC12POD
